48V Factory Controller

Factory 48V Controller included with the Scoota

A – Main Motor Power Feed (R +72V, Bk Gnd): To main battery bank +/- terminals
B – Phase Wires (Bl, Gr, Y): To corresponding wires on connector block.
C – Hall Sensor: To corresponding connector on loom
D – Throttle Connector (Bk, Gy, Red)
E – Brake Cut-off (Vi): To brake/sidestand 12V line (meets 2-pin Gr, R/Bk connector on loom with F)
F – Controller Power Feed: To R/Bk in 2-pin Gr, R/Bk connector on loom with E

48V Controller Specs

This entry was posted on Sunday, August 29th, 2010 at 4:37 pm and is filed under 3. Components & Specs, 3.4.2. 48V Factory Controller. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Enter your comment here...

Fill in your details below or click an icon to log in:

Email (required) (Address never made public)

Name (required)

Website

You are commenting using your WordPress.com account. ( Log Out / Change )

You are commenting using your Twitter account. ( Log Out / Change )

You are commenting using your Facebook account. ( Log Out / Change )

Connecting to %s

Zenid's Ego Scoota Blog